Page 85 - MidlandMetalsCatalog2010baNN
Basic HTML Version
84
Thread Size - B
Flareless
•Typical Application
Pneumatic instrumentation circuits, lubricant and cooling
lines.
•Working Pressure and Temperature Ranges
Up to 150 PSI from 0
o
F to + 150
o
F with thermoplastic
tubing. Up to 300 PSI from 0
o
F to + 175
o
F with soft
metal tubing.
•Maximum allowable metal tube wall thickness for use
with Poly-Tite fittings:
1/8”, 3/16” O.D. --no limitation,
1/4” O.D.--.035 5/16”, 3/8”,1/2” O.D.--.049
•Vibration
Excellent Resistance.
•Temperature Range
Depends on tubing used. -65
o
F to +250
o
F
(-53
o
C to +121
o
C) with brass sleeve, -40
o
F to +150
o
F
(-40
o
C to +66
o
C) with plastic sleeve. (Refer to tubing
temperature range.)
•Material
CA360 Brass body, plastic or brass sleeve.
•Used With
Aluminum & copper tubing. Hard plastic tubing requires
brass sleeve. Not recommended for steel tubing.
•
Tolerance
+/- .02 on all dimensions. Dimension data can change
without notice. Please call us when dimensions are critical.
•Advantages
No flaring of tubing required. Easy installation, captive
sleeve, pre-assembled for installation and can be reas-
sembled. Nuts rotate around the sleeve during tightening,
preventing twisting of tubing.
•Assembly Instructions
1-
Cut tubing to desired length.
2-
Slide nut/sleeve assembly on tube. Threaded end
“A” of nut must face toward fitting.
3-
Bottom tubing into fitting.
4-
Plastic sleeve - Tighten nut hand tight.
Brass Sleeve - Tighten nut hand tight, then an
additional 3/4 turn.
.D.OebuT
8/1
61/3
4/1
4/1
61/5
8/3
2/1
B-eziSdaerhT
42-61/5
42-8/3
42-8/3
42-8/3
42-61/7
42-2/1
02-61/11
Flareless Brass Tube Fittings are Interchangeable with
Poly-Flo®, Poly-Tite® and Poly-Line® and Poly-Fit®
B
RASS
Those who believe in telekinetics, raise my hand.
- Kurt Vonnegut
F
LARELESS
B
RASS
F
ITTINGS