Page 28 - MidlandMetalsCatalog2010baNN

27
Push On Barb Fittings
Typical Application: Low Pressure Air, Fuel,
Lube, and Oil Lines
Material: CA360 Brass
Advantages: Easy assembly. No clamps needed!!
• Assembly Instructions
1- Lubricate insert.
2- Hold hose at angle as shown & push on and up
over first barb.
3- Continue to push straight on until hose is seated
under protective plastic cap. Keep hands back from
hose end area so that hose can expand.
Actual Profile of Push On Barbs
• Disassembling Instructions
1- Split hose as shown above. Do not cut completely
through hose. Sealing edge of barb could be damaged.
2- Bend hose and remove with a quick pull.
P USH ON HOSE BARB BRASS FITTINGS
B
RASS
1/4" 5/16" 3/8"
.47 .41 .345
1/2" 5/8" 3/4"
.60 .725 .85