Page 264 - MidlandMetalsCatalog2010baNN

263
C
LAMPS
F-CLAMPS HOSE CLAMPS
Open End Clamps are of the same general construction as the
preformed clamps with this exception, the double wrapping of
the band around the hose or article is part of the application. The
open end clamps are used when one end or both, of the article
to be clamped is not free, or an obstruction prevents slipping a
preformed clamp over the end.
Galvanized Preformed Clamps 2 1/2 inch I.D. and above, and
5/8” wide open end clamps have a stainless steel lock for greater
strength and rigidity.
Preformed Clamps are double wrapped and formed to a given
diameter. Used primarily where one end of the hose or article is
free to allow the clamps to be slid over the hose end before the
fitting is inserted. All clamps may be pulled down to a smaller
diameter but cannot be adjusted to a larger diameter.
OPEN END CLAMPS
(3/8” AND 5/8” (NOMINAL) WIDTH)
PREFORMED CLAMPS
(3/8” AND 5/8” (NOMINAL) WIDTH)
APPLICATION TOOLS
For 3/8", 5/8” ......................................F-38, F-40, F-100
Double-wrapped, Triple Punched, Holds Permanently
Catalog
Number
Band
Width &
Thickness
Clamp
I.D.
Inches
Catalog
Number
Band
Width &
Thickness
FO-3 3/8 x .022 ---- 13/16 FOS-3 3/8 x .020 ----
FO-311 3/8 x .022 ---- 1 3/8 FOS-311 3/8 x .020 ----
FO-316 3/8 x .022 ---- 2 FOS-316 3/8 x .020 ----
FO-325 3/8 x .022 ---- 3 1/8 FOS-325 3/8 x .020 ----
WITH STAINLESS STEEL LOK
FO-8 5/8 x .025 ---- 2 FOS-8 5/8 x .022 ----
FO-10 5/8 x .025 ---- 2 1/2 FOS-10 5/8 x .022 ----
HEAVY DUTY BANDS
FO-12 5/8 x .031 ---- 3 FOS-12 5/8 x .022 ----
FO-14 5/8 x .031 ---- 3 1/2 FOS-14 5/8 x .022 ----
FO-16 5/8 x .031 ---- 4 FOS-16 5/8 x .022 ----
FO-18 5/8 x .031 ---- 4 1/2 FOS-18 5/8 x .022 ----
FO-20 5/8 x .031 ---- 5 FOS-20 5/8 x .022 ----
FO-24 5/8 x .031 ---- 6 FOS-24 5/8 x .022 ----
FO-28 5/8 x .031 ---- 7 FOS-28 5/8 x .022 ----
FO-32 5/8 x .031 ---- 8 FOS-32 5/8 x .022 ----
FO-36 5/8 x .031 ---- 9 FOS-36 5/8 x .022 ----
FO-40 5/8 x .031 ---- 10 FOS-40 5/8 x .022 ----
FO-48 5/8 x .031 ---- 12 FOS-48 5/8 x .022 ----
FO-56 5/8 x .031 ---- 14 FOS-56 5/8 x .022 ----
FO-64 5/8 x .031 ---- 16
FO-80 5/8 x .031 ---- 20
FO-96 5/8 x .031 ---- 24
FO-144 5/8 x .031 ---- 36
FO-168 5/8 x .031 ---- 42
Catalog
Number
Band
Width &
Thickness
Clamp
I.D.
Inches
Catalog
Number
Band
Width &
Thickness
F-3 3/8 x .025 ---- 13/16 FS-3 3/8 x .020 ----
F-311 3/8 x .025 ---- 1 3/8 FS-311 3/8 x .020 ----
F-4 5/8 x .025 ---- 1 FS-4 5/8 x .022 ----
F-5 5/8 x .025 ---- 1 1/4 FS-5 5/8 x .022 ----
HEAVY DUTY BANDS
F-6 5/8 x .031 ---- 1 1/2 FS-6 5/8 x .022 ----
F-7 5/8 x .031 ---- 1 3/4 FS-7 5/8 x .022 ----
F-8 5/8 x .031 ---- 2 FS-8 5/8 x .022 ----
F-9 5/8 x .031 ---- 2 1/4 FS-9 5/8 x .022 ----
F-10 5/8 x .031 ---- 2 1/2 FS-10 5/8 x .022 ----
F-11 5/8 x .031 ---- 2 3/4 FS-11 5/8 x .022 ----
F-12 5/8 x .031 ---- 3 FS-12 5/8 x .022 ----
F-14 5/8 x .031 ---- 3 1/2 FS-14 5/8 x .022 ----
F-16 5/8 x .031 ---- 4 FS-16 5/8 x .022 ----
F-18 5/8 x .031 ---- 4 1/2 FS-18 5/8 x .022 ----
F-20 5/8 x .031 ---- 5 FS-20 5/8 x .022 ----
F-24 5/8 x .031 ---- 6 FS-24 5/8 x .022 ----
F-28 5/8 x .031 ---- 7 FS-28 5/8 x .022 ----
F-32 5/8 x .031 ---- 8 FS-32 5/8 x .022 ----
See page 267 for these tools.