Page 132 - MidlandMetalsCatalog2010baNN

131
B
RASS
Dimension data can change without notice.
Please call us when dimensions are critical.
MALE 45° ELBOW
MALE 45° SWIVEL ELBOW
Part # Tube O.D. x
Male NPTF
A B Body
Size
Approx.
Wt. Lbs.
540402 1/4” x 1/8” 0.83 0.89 0.37 0.06 ----
540404 1/4” x 1/4” 0.91 0.89 0.37 0.06 ----
540602 3/8” x 1/8” 0.75 0.89 0.51 0.08 ----
540604 3/8” x 1/4” 0.95 0.98 0.49 0.10 ----
540606 3/8” x 3/8” 0.89 0.98 0.50 0.10 ----
540608 3/8” x 1/2” 1.14 1.30 0.87 0.15 ----
540804 1/2” x 1/4” 1.00 1.24 0.82 0.13 ----
540806 1/2” x 3/8” 1.05 1.10 0.62 0.16 ----
540808 1/2” x 1/2” 1.20 1.10 0.62 0.18 ----
541006 5/8” x 3/8” 1.46 1.02 1.06 0.22 ----
541008 5/8” x 1/2” 0.98 0.98 0.72 0.21 ----
541208 3/4” x 1/2” 1.36 1.08 0.93 0.28 ----
541212 3/4” x 3/4” 1.36 1.08 0.94 0.32 ----
Part # Tube O.D. x
Male NPTF
A B Hex Approx.
Wt. Lbs.
540402S 1/4” x 1/8” 0.60 0.72 0.43 0.06 ----
540404S 1/4” x 1/4” 1.10 0.89 0.56 0.09 ----
540602S 3/8” x 1/8” 1.07 0.98 0.43 0.10 ----
540604S 3/8” x 1/4” 1.07 0.98 0.56 0.11 ----
540606S 3/8” x 3/8” 1.23 0.97 0.68 0.14 ----
540804S 1/2” x 1/4” 1.22 1.12 0.56 0.14 ----
540806S 1/2” x 3/8” 1.32 1.10 0.68 0.16 ----
540808S 1/2” x 1/2” 1.61 1.10 0.88 0.18 ----
541008S 5/8” x 1/2” 1.69 1.23 0.87 0.24 ----
Benefits for Cost Savings & Engineering Project
• Fast assembly: No tools required. Simply push tubing in.
Saves up to 75% of assembly time compared to standard air
compression fittings. No loose parts to handle.
• Fast disconnect: Hold the collet collar with two fingers and
pull out tube. No tools required.
• Reusable: Can be connected and disconnected several times.
• Reliable sealing: Using recommended tubing, full sealing is
guaranteed.
• Versatility: Buna N O'ring standard. Viton and others avail-
able per request. Secure Tube Retention. Pulling on tubing
only serves to tighten the connection.
• Pre-Applied Teflon® based pipe sealant on all male pipe
threads, saving customer additional labor.
• Full Flow Design, provides more flow area than conventional
fittings with internal tube supports even in the swivels.
DOT Fittings are constructed with an all brass captive eyelet which
allows for maximum flow. The brass captive eyelet with extended
length is floating and has a machined top end radius for easy instal-
• Materials:
CA360 Brass - Barstock CA377 - Forged
"O" Ring: Buna - Nitrile (90 Durometer)
EP (Ethylene Propylene)
• Working Pressures & Temperature Ranges
Vacuum to 150 PSI
-40°F to 200° F ( -40°C to +93°C )
• Ordering Options
The following options are available only by cus-
tomer request and may be subject to minimum
run quantities for ordering.
-Viton "O" Ring seals
- Metric DQ DOT "One-Push" tube fittings with
BSPT threads.
- Manifolds with DQ DOT One Push Cartridges.
D.O.T. PUSH-IN TUBE FITTINGS
Meets D.O.T. FMVSS 571.106 SAE J1131 Air Brake System Requirements
lation of tubing. All male threads have a pre-applied
Teflon® based pipe sealant to provide for easy assembly
and leak proof seal.
B
A
Hex
B
A
Body
Size
AQ54DOT
179MTNS
1880
DQ54DOT
AQ54DOTS
179PMT
1880
DQ54DOTS
Forged
D.O.T. PUSH-IN BRASS FITTINGS