Page 8-9 - LT_3722_v8_MRO.qxp

Gasket Type Formed-in-place Use with cut gasket Forme
Gap Fill 0.010" (0.25 mm) N.A. 0.010"
Gap Fill with Primer 0.050" (1.27 mm) N.A. 0.020"
Cure Method Anaerobic Anaerobic An
Cure Time N.A. N.A. 2
Temperature Resistance 300°F (150°C)/N.A. 300°F (150°C)/N.A. 300°F (
(Continuous / Intermittent)
Instant Seal Excellent Excellent
Oil Resistance Excellent Excellent Ex
Water / Glycol Resistance Excellent N.A.
Common Sizes / Part Number 6 ml tube – 51817 9 g stick – 39155 9 g st
50 ml tube – 51831 19 g stick – 39156 18 g s
38 g stick – 39157 37 g s
Solution
6
Helpful Hints:
• If there are traces of old gasket left on the parts to be sealed,
clean with Loctite® Chisel® Gasket Remover
• All parts must be clean and dry before sealing –
use Loctite® ODC-Free Cleaner & Degreaser
• Anaerobic products cure between metal surfaces with
the absence of air
Loctite® 518™ Gasket
Eliminator® Flange Sealant
Recommended for coating and
re-using gaskets to improve
sealing. Spray Loctite® 7649™
Primer N ™ on both flange surfaces
and both sides of the gasket.
NSF/ANSI 61 Certified.
CFIA Approved.
Loctite® Qu
548™ Gaske
Flange Sea
Patented, semi
for on-the-spot
conventional ga
Can be applied
a variety of met
aluminum, to fo
resistant seal. S
and fills gaps to
Loctite ® QuickStix™
534 ™ Hi-Tack
Gasket Dressing
No mess, semi-solid formula offers
added control and ease of use.
Patented package is portable and
won’t leak or spill. Seals and holds
the heaviest gaskets in place during
assembly. Solvent-free and low odor.
Suitable to 300°F (149°C).
Yes
Loctite ® 518™ Gasket
Eliminator® Flange Sealant
Loctite® QuickStix ™ 534™
Hi-Tack Gasket Dressing
Coat existing gasket Positioning cut gaskets
Loctite
548™ Gas
Flan
Additional Loctite® brand Gasketing Products
Name Color Part # Pkg. Size
Loctite® Gasket Sealant 1 Brown 30511 3 oz. tube
Loctite® Gasket Sealant 2 Black 30514 3 oz. tube
Loctite® Aviation Gasket Sealant Brown 30516 1 pt. can
Loctite® High Performance Silicones
(Loctite® 598™ Black, 5920™ Copper,
and 5699™ Grey)
Black
Copper
Grey
59875
82046
18581
300 ml
cartridge
Loctite® Superflex® RTV, Silicone Adhesive Sealants
(Black, Clear, White, Blue, Red Hi-Temp)
Black
Clear
White
Blue
Red
59375
59575
59475
30533
59675
300 ml
cartridge
Loctite® Copper Gasket Adhesive Copper 30535 9 oz. aerosol
Loctite® 574™ Flange Sealant – Fast Cure Orange 24018 50 ml tube
Loctite® 515™ Gasket Eliminator® Flange Sealant Purple 51531 50 ml tube
Loctite® Hi-Tack Gasket Sealant Red 30525 1 pt. can
Loctite® 510™ Gasket Eliminator® Flange Sealant Pink 51031 50 ml tube
DOES THE EXISTING GASKET NEED TO BE
USED AS A SHIM?
Gasketing
Sealing and Flanges
• No shimming effect – controlled tolerances, no need
for re-torquing
• Fill all voids – reduce the need for a fine surface finish of flanges
• Parts can be disassembled easily even after extended service
• Resists high pressure when fully cured
LT_3722_v8_MRO.qxp 11/5/07 2:59 PM Page 6