Page 86-87 - LT_3722_v8_MRO.qxp

FILLING CRACKS
BONDING
33
1. Clean surface.
2. Mix Loctite® Fixmaster® Poxy Pak™ Epoxy Adhesive according to
package directions.
3. Spread mixed material over crack.
4. Sets in 5 minutes, full cure in 8 hours.
5. For maximum protection, a piece of material can be applied over
the top of the crack to spread the load after applying the mixed
adhesive. The adhesive will hold it in place.
1. Prepare the surface using Loctite® ODC-Free Cleaner and Degreaser.
2. Attach mix nozzle to the Loctite® H8600™ Weld Eliminator™ Structural
Adhesive cartridge.
3. Dispense 50 mm (2") of material to prime nozzle.
4. Apply a continuous bead of adhesive in the area you want to patch and/or seal.
5. Assemble patch using pneumatic pins or rivets, or run screws to hold
parts together while the adhesive reaches full cure.
6. Equipment can be back in operation after 24 hours.
STRUCTURAL BONDING