Page 58-59 - LT_3722_v8_MRO.qxp

5
BLIND HOLES (CAP SCREWS, ETC.)
1. Clean all threa ds (bolt and nut) with Loctite® ODC-Free Cleaner & Degreaser.
2. If necessary, spray all threads with Loctite® 7649™ Primer N™. Allow to dry.
3. Select the proper strength Loctite® threadlocker.
4. Insert bolt into thru hol e assembly.
5. Apply several drops of liquid threadlocker onto bolt at targeted tightened
nut engagement area or, when using the stick product, completely fill
the root of the threads at the are a of engagement.
6. Assemble and tighten nut as usual.
1. Clean all threads (bolt and hole) with Loctite® ODC-Free Cleaner & Degreaser.
2. If necessary, spray (bolt and hole) with Loctite® 7649™ Primer N™.
Allow 30 seconds to dry.
3. Select the proper strength Loctite® threadlocker.
4. Squirt several drops down the sides of the female threads.
5. Apply several drops to bolt.
6. Tighten as usual.
Note: Using Loctite® threadlockers will virtually eliminate stripped
threads, in aluminum or magnesium housings, caused by
galvanic corrosion.
Not Here
Onto
Threads
Onto
Threads
THREADLOCKING
THRU HOLES (BOLTS AND NUTS)
Apply Here
LIQUID AND SEMI-SOLIDS
LIQUID ONLY