Page 59 - KT_Catalog

59
Because we continually examine ways to improve our products, we reserve the right to alter specifications OR DISCONTINUE PRODUCTS without prior notice.
KKTCA0408
Please refer to the back page for the location of your nearest warehouse for availability of products/sizes shown.
SPECIALTY
PRODUCTS
Nominal Specifcations
Series Size Inside Diameter Approx. O.D. Max. W.P. Approx. Wt. Approx. Mass Length/Coil
No. Code
per 100 ft. per 100 m
Inches mm Inches mm PSI MPa (lbs.) (kg.) ft. m
K7000 10 5/8 16 55/64 22 120 0.83 17.5 25 200 61
K7000 12 3/4 19 1 1/16 27 120 0.83 28 40 200 61
K7000 16 1 25 1 21/64 34 120 0.83 38 55 300 91
K7000 20 1 1/4 32 1 5/8 41 120 0.83 55 78 100 30
NOTE: A new coil of tubing can have its pliancy restored by the application of heat before it is placed in service underground. This will facilitate handling
and its attachment to pneumatic loading equipment. Steam or very hot water passed through the coiled tubing will remove the "set" from the new tubing
and allow it to be straightened easily. The tubing should then be left to cool in the straight position.
A specially formulated anti-static PVC tubing for the
loading of ammonium nitrate/fuel oil blasting agents
used in the mining and construction industries.
Construction:
Specially-formulated anti-static PVC compound.
Features:
● Conductivity – effectively limits build-up of static
electricity; provides path for its safe dissipation to ground.
● Bleeds off static charges built up during pneumatic
loading of Ammonium Nitrate/Fuel Oil mixtures.
● Suffcient resistance – guards blasting circuit against stray
electrical currents.
● Wear resistance – smooth interior and exterior surfaces,
combined with tough material formulation, provide good
wear resistance.
● Self-extinguishing characteristics.
● Excellent fexibility – suffciently fexible to handle easily,
yet rigid enough to reach upwards into collars of
steeply-inclined holes.
● Easily identifable – co-extruded continuous orange stripe
makes tubing visible in underground lighting.
● Embossed branding – provides lasting identifcation.
● Packaged for ease of handling and shipping.
Applications:
● Bulk unloading of ammonium nitrate/fuel oil blasting agents
in small diameter holes.
● Successfully used for years with Orica’s blast hole
chargers, intermediate loaders and the Penberthy
Anoloader.
● Mining and construction site blasting.
Service Temperature Range: -30°F (-35°C) to +150°F (+65°C)
Series K7000
Anti-Stat Blasting Tubing