Page 41 - KT_Catalog

41
Because we continually examine ways to improve our products, we reserve the right to alter specifications OR DISCONTINUE PRODUCTS without prior notice.
KKTCA0408
Please refer to the back page for the location of your nearest warehouse for availability of products/sizes shown.
Series HS1171,
HS1174, HS1176
General Service PVC
Pneumatic Air Tool Hose
Assemblies
Service Temperature Range:-15°F (-26°C) to +150°F (+65°C)
† Note: Working Pressure decreases as temperature increases. Pressure ratings can only be obtained with proper coupling procedures.
Standard Stock Colors Maximum Working Approx. Wt.
Size
Nominal ID Nominal OD Pressure† (PSI) Assembled per Pkg.
HS1171 HS1174 HS1176 Code @70°F @122°F Lengths
Yellow Red Blue (In) (mm) (In) (mm) (20°C) (50°C) 25 ft. 50 ft. 100 ft.
✔ ✔ ✔ 04 1/4 6.5 .475 12.1 300 150 25/50/100 ft. 1.9 lbs. 3.7 lbs. 7.4 lbs.
✔ ✔ ✔ 06 3/8 9.5 .600 15.2 300 150 25/50/100 ft. 2.6 lbs. 5.1 lbs. 10.2 lbs.
✔ ✔ ✔ 08 1/2 12.7 .750 19.1 300 150 25/50/100 ft. 3.5 lbs. 7.0 lbs. 14.0 lbs.
Nominal Specifcations
Note: Hose assemblies are furnished with the following fttings: 1/4" ID – 1/4" X 1/4"M NPT, 3/8" ID – 3/8" X 1/4"M NPT, 1/2" ID – 1/2" X 3/8"M NPT.
Series HS1181,
HS1184, HS1186
Utility-Grade PVC Air Tool
Hose Assemblies
AIR & WATER HOS
E ASSEMBLIES
Service Temperature Range:+14°F (-10°C) to +150°F (+65°C)
† Note: Working Pressure decreases as temperature increases. Pressure ratings can only be obtained with proper coupling procedures.
Standard Stock Colors Maximum Working Approx. Wt.
Size
Nominal ID Nominal OD
Pressure† (PSI) Assembled per Pkg.
HS1181 HS1184 HS1186 Code @70°F (20°C) Lengths
Yellow Red Blue (In) (mm) (In) (mm) 25 ft. 50 ft. 100 ft.
✔ ✔ ✔ 04 1/4 6.5 .475 12.1 300 25/50/100 ft. 1.9 lbs. 3.7 lbs. 7.4 lbs.
✔ ✔ ✔ 06 3/8 9.5 .600 15.2 300 25/50/100 ft. 2.6 lbs. 5.1 lbs. 10.2 lbs.
Nominal Specifcations
Note: Hose assemblies are furnished with the following fttings: 1/4" ID – 1/4" X 1/4"M NPT, 3/8" ID – 3/8" X 1/4"M NPT.
Note: Refer to page 33 for Technical Information.
Note: Refer to page 34 for Technical Information.