Page 66 - Gaskets&PackingMaterialsCatalog2010

SEO Version

53
Silicone Rubber 50 Durometer
Meets MIL-R-5847/ZZR-765. Excellent heat resistance, low temperature
flexibility, resistance to compression set. Resistance to ozone, aging, sunlight
and many common fuels, oils and chemicals. Durometer 50. Temperature range
-80°F to +425°F. Tensile strength 700 PSI. Elongation 250%. Red color.
STYLE 0729
EPR Peroxide Cured 60 Durometer
Similar to Style 0723 except peroxide cured. Tensile strength 1800 PSI.
Elongation 400%.
STYLE 0723P
Butyl 60 Durometer
Good resistance to gas permeation. Non-oil resistant. Many applications.
Commonly used in inner tubes and tire inner liners. Resistance to flexing and
abrasion is very good. Durometer 60±5. Tensile strength 1100 PSI. Elongation
400%. Temperature range -40°F to 180°F.
STYLE 0728
Size
Part Number
1/16" x 48"
0723P062x48
1/8" x 48"
0723P125x48
Size
Part Number
1/16" x 36"
0728062x36
1/8" x 36"
0728125x36
1/4" x 36"
0728250x36
Size
Part Number
1/32" x 36"
0729031x36
1/16" x 36"
0729062x36
1/8" x 36"
0729125x36
3/16" x 36"
0729187x36
1/4" x 36"
0729250x36
EPR 60 Durometer
Excellent general purpose rubber. Excellent resistance to heat, cold ozone, and
ultraviolet light. This makes it an excellent material for outdoor applications. Also
has excellent chemical resistance. Excellent electrical and dynamic properties.
Not oil resistant. Tensile strength 800 PSI. Durometer 60±5. Temperature range
-20°F to 220°F.
STYLE 0723
EPR 40 Durometer
Same as Style 0723 with 40 Durometer.
STYLE 0723S
Size
Part Number
1/8" x 36"
0723S125x36
Size
Part Number
1/16" x 36"
0723062x36
3/32" x 36"
0723093x36
1/8" x 36"
0723125x36
3/16" x 36"
0723187x36
1/4" x 36"
0723250x36
3/32" x 48"
0723093x48
1/8" x 48"
0723125x48
Silicone Rubber 40 Durometer
Same as Style 0729 except with 40 Durometer. Tensile strength 700 psi.
Elongation 240%.
STYLE 0729S
Size
Part Number
3/32" x 36"
0729S093X36
Fluoroelastomer, Premium Grade Plate
Finish 75 Durometer
Used where chemical resistance, low gas permeability and continuous service at
extreme temperatures are required. Widely used in the aerospace and
automotive industries. Durometer 75±5 Tensile strength 800 PSI. Elongation
225%. Temperature range -20°F to 400°F; intermittent to 450°F.
STYLE 0722
Size
Part Number
1/32" x 36"
0722031x36
1/16" x 36"
0722062x36
1/8" x 36"
0722125x36
3/16" x 36"
0722187x36
1/4" x 36"
0722250x36
1/16" x 48"
0722062x48
1/8" x 48"
0722125x48