Page 4 - New Supercatalog Color.indd

C-3
IFG
®5500
General ServiceStyle G-9900High TemperatureStyle 3125SS/TCHigh TemperatureStyle
ST
-706
Saturated, Superheated SteamStyle 3500 GYLON
®
Aggressive ChemicalsStyle 3510 GYLON
®
Aggressive ChemicalsStyle 3545 GYLON
®
Aggressive Chemicals
1. Flange Metallic ¦ ¦ ¦ ¦ ¦ ¦ ¦
Materials Non-Metallic *
2. Continuous Ambient to 200°F
Operating (20°C to 95°C) ¦ ¦ ¦ ¦ ¦ ¦ ¦
Temperature 200°F to 300°F
(COT) (95°C to 150°C) ¦ ¦ ¦ ¦ ¦ ¦ ¦
300°F to 400°F
(150°C to 205°C) ¦ ¦ ¦ ¦ ¦ ¦ ¦
400°F to 500°F
(205°C to 260°C) ¦ ¦ ¦ ¦ ¦ ¦ ¦
500°F to 650°F
(260°C to 345°C) ¦ ¦ ¦
650°F to 750°F
(345°C to 400°C) ¦ ¦
750°F to 1200°°F
(400°C to 650°C) *
3. Application Vacuum to 250 psig
Pressure (Vacuum to 17 bar) ¦ ¦ ¦ ¦ ¦ ¦ ¦
Vacuum to 1000 psig
(Vacuum to 69 bar) ¦ ¦ ¦ ¦ ¦ ¦ ¦
Vacuum to 1500 psig
(Vacuum to 103 bar) ¦ ¦ ¦
Vacuum to 2000 psig
(Vacuum to 138 bar) ¦ ¦
4. PxT Values 0 to 50,000 psig x °F
(0 to 1,500 bar x °C) ¦ ¦ ¦ ¦ ¦ ¦ ¦
0 to 350,000 psig x °F
(0 to 12,000 bar x °C) ¦ 1 ¦ ¦ ¦ 2* ¦ ¦ ¦
0 to 700,000 psig x °F
(0 to 25,000 bar x °C) ¦ 3 ¦ 3
Quick Reference Selection Guide
* Consult Garlock Applications Engineering at 1-800-448-6688
P x T max. = psig x °F (bar x °C)
1 1/8" thick IFG® is rated at 250,000 P x T
2 1/8" thick ST-706 is rated at 500,000 P x T
3 1/8" thick G-9900 and 3125SS/TC are rated at 350,000 P x T
To be considered acceptable for a specific applica-
tion, a product must meet the criteria in all four of the
categories shown below. Acceptable values are marked
with a " ¦ ". Also refer to chemical compatibility charts
to verify chemical compatibility or call Garlock Engi-
neering for assistance.
This chart does not take special operation condi-
tions into consideration. i.e., pressure surges, tempera-
ture cycling and flange design.
WARNING:
Properties/applications shown throughout this brochure are typical. Your specific application should
not be undertaken without independent study and evaluation for suitability. For specific application
recommendations consult Garlock. Failure to select the proper sealing products could result in
property damage and/or serious personal injury.
Performance data published in this brochure has been developed from field testing, customer field
reports and/or in-house testing.
While the utmost care has been used in compiling this brochure, we assume no responsibility for
errors. Specifications subject to change without notice. This edition cancels all previous issues.
Subject to change without notice.
GARLOCK is a registered trademark for packings, seals, gaskets, and other products of Gar-
lock.