Page 46 - GarlockFluidSealing2010

B-14
Pressure
¦ Without external reinforcing rings: up to 3 psi
(0.2 bar)
¦ With external reinforcing rings: up to 15 psi (1.0 bar)
Vacuum
¦ Without internal reinforcing rings: up to 3 inches
(75 mm) Hg
¦ With internal reinforcing rings: up to 15 inches
(381 mm) Hg
Contact Garlock if higher vacuum or pressure ratings are required.
Movement Capabilities
Style 9394
This multi-convoluted, lightweight expansion joint
is designed for low pressure applications that require
signifcant amounts of movement, axially and/or
laterally. Its low spring rates make it ideal for load cell
applications.
Note: Flanged designs require retaining rings for an effective seal.
Sleeve type requires clamps; the overall length of the expansion joint
should include an additional 4" (101.6 mm) for clamping space.
Benefts
¦Lightweight design installs easily, costs less to ship
¦Can be custom-designed for even greater move-
ment capability
¦Choice of construction materials suitable for wide
range of temperatures
¦Available in fanged or sleeve type design, up to 48"
max. (1,219 mm) I.D. *Contact Garlock for larger ID
sizes
Alternate Tube and Cover
Materials
¦ Neoprene ¦ EPDM
¦ Nitrile ¦ Viton*
¦ Hypalon*
¦ Natural/gum rubber
Cross Section of Style 9394 with Reinforcing Rings
Temperature
Standard Materials Max. Temp.
Chlorobutyl/polyester............................ +250°F (+120°C)
Chlorobutyl/fberglass/Kevlar*............... +300°F (+150°C)
Fluoroelastomer/fberglass/Kevlar. ....... +400°F (+205°C)
* Kevlar is a registered trademark of DuPont;
Viton and Hypalon are registered trademarks of DuPont Dow Elastomers.
Pipe Size Movement
Type Movement Inch mm Inch mm
Compression 2-6 50-150 3/4 19
8-10 200-250 7/8 22
12-18 300-450 1-1/8 28
20-28 500-700 1-5/8 41
30-Up 750-Up 1-3/4 44
Elongation 2-6 50-150 5/8 16
8-10 200-250 3/4 19
12-18 300-450 1 25
20-28 500-700 1-1/4 31
30-Up 750-Up 1-1/2 38
Lateral 2-6 50-150 5/8 16
8-10 200-250 3/4 19
12-18 300-450 7/8 22
20-28 500-700 1 25
30-Up 750-Up 1-1/2 38