Page 83 - ExpansionJointsCatalog2010

4. Tighten each bolt on each
pressure plate about 2–3 turns,
going around the pipe (do not
cross-tighten bolts) until a
proper seal is formed. A socket or
offset wrench for 5/16, 1/2, 3/8,
9/16, 3/4, or 1-13/16" bolts will
handle all installations.
Easy Installation
3. Slide the PEN-SEAL into position.
2. Wrap the PEN-SEAL around the
pipe and connect the ends.
1. Properly select the size of the
PEN-SEAL required to seal the
penetration using the Sizing
Charts on pages 4 through 7.