Page 50 - ExpansionJointsCatalog2010

© PROCO PRODUCTS, INC. Rev. 00 10/05
Notes: Hypalon® and Viton® are registered trademarks of DuPont Dow Elastomers.
All products are reinforced with polyester tire cord.
1. Check Valve "cover" can be coated with Hypalon ® on special order.
2. Styles with Neoprene covers meet all requirements of U.S.C.G.
3. NSF61 approved material available upon request.
ProFlex rubber check valves710/730STYLES
The PROCO Series 700 ProFlex Rubber Check Valve is a cost effec-
tive way to control back pressures from sewage treatment plants,
outfalls and tidal operations. They are a fully passive flow device
requiring neither maintenance, outside sources of power or manual
assistance to operate.
The PROCO Series 700 ProFlexRubber Check Valves are offered as
direct replacements for ineffective and maintenance-ridden flap type
check valves, which are commonly known to seize, rust and bind in
unwanted positions. Unlike flap type valves, the ProFlexrubber check
valves will handle large obstructions without jamming or having swing
gates binding open. Specify the PROCO Series 700 ProFlex Rubber
Check Valves to provide backflow protection from: (1) Sewage slur-
ries, (2) Outfalls to ocean fronts from heavy rainfall activity, (3) Pre-
vention from land erosion due to back flow conditions, (4) Protection
from saltwater to fresh water ponds or catch basins and numerous
other water based applications. Our history in the manufacture of rub-
ber piping products dates back to 1930. When an engineered solution
is needed to solve a piping or backflow problem, call PROCO.
The introduction of the PROCO Series 700 ProFlex Rubber Check
Valves is the latest addition to the PROCO line, which has been spe-
cifically designed for the Water and Waste Water industry.
With current global awareness for clean water and the urgency to have all
water treatment plants operating under stricter standards, the PROCO Se-
ries 700 ProFlexRubber Check Valves will also be available in NSF61 ap-
proved Nitrile for all potable water and sewage applications. This will in-
clude water treatment plants, direct installation on potable water pump sys-
tems and other piping systems directly related to the potable water industry.
The PROCO Series 700 ProFlexRubber Check Valves are available in a
Flanged Type (Style 710), or a Sleeved Type (Style 730).
• Style 710 — Flanged Type: Designed to bolt directly to existing
flanges or new installations, flanges are drilled 150# standard. Other
drilling standards such as: ANSI 250/300#, British Standard BS-10, JIS,
and DIN as well as square flanges are also available upon request. The
Style 710 can be installed in either a vertical or horizontal application.
• Style 730 — Sleeve Type: Designed to easily slip over existing pipe
and affixed with heavy-duty Stainless Steel clamps. The Style 730 can
be installed in either a vertical or horizontal application.
Elastomers: All of the PROCO Series 700 ProFlex Rubber Check Valves
are available in a various selection of elastomers (see Table 1 below) and
back pressure capabilities to suit most applications.
The PROCO Series 700 ProFlexRubber Check Valves will not freeze or
deform and function solely on inlet and back pressures which will be present
in most applications.
Each valve is carefully constructed using the finest of engineered mate-
rials and built by the most experienced rubber technicians in the indus-
try. All check valves are engineered in precise detail to ensure proper
operation and will provide years of unhindered operation and trouble-
free service.
Benefits of the PROCO Series 700 ProFlexRubber Check Valves:
• All rubber construction resists abrasive slurries
• NSF61 approved materials
• Very quiet operation with no water hammer
• Unique design prevents backflow
• Negligible maintenance and energy costs
• Will not warp or freeze
• Quick interchange with any flap type check valve
• Available in sizes 1" to 96"
• Available with special IDs to suit concrete pipe
For your complete project requirement PROCO also maintains the largest
inventory of expansion joints in the world. Rubber, PTFE Lined, Plastic or
Metal Hose — PROCO can ship the products you need when you need
them! In fact, when it comes to expansion joints, if PROCO doesn’t have
them in stock … nobody does!
Information • Ordering • Pricing • Delivery. Day or night, weekends and
holidays … the PROCO phones are monitored 24 hours around the clock.
When you have a question, you can call us.
Toll-Free Phone . . . . 800 / 344-3246 USA/CANADA
International Calls . . 209 / 943-6088
Fax . . . . . . . . . . . . . . 209 / 943-0242
Email . . . . . . . . . . . . . sales@procoproducts.com
Website . . . . . . . . . . . www.procoproducts.com
Weekday office hours are 5:30 a.m. to 5:15 p.m. Pacific Time.
Table 1: Available Materials • Temperatures
PROCO
Material
Codes
For Specific Elastomer
Recommendations, See: PROCO™ “Chemical To Elastomer Guide”
Cover 1, 2
Elastomer
Maximum
Operating
Temp. °F ( °C)
Branding
Label
Color
F.S.A.
Material
Class
Tube
Elastomer
BB Chlorobutyl Chlorobutyl 250° (121° ) Black STD. III
EE EPDM EPDM 250° (121° ) Red STD. III
NH Neoprene Hypalon® 212° (100° ) Green STD. II
NN Neoprene Neoprene 225° (107° ) Blue STD. II
PP Nitrile Nitrile3 225° (107° ) Yellow STD. II
NR Neoprene Natural Rubber 180° (68° ) White STD. I
NV Neoprene Viton ® 225° (107° ) Orange STD. III