Page 110 - DixonCatalog20092010

108 DPL410 877.963.4966 • www.dixonvalve.com
E
Air
small blank end medium blank end *
Blank Ends
Head Size Part # Price/E Pkg Qty
small
medium *
½" to 1"
1½" to 2"
SL00
SL01
$12.40
32.80
15
3
* medium blank end comes with 1" NPT pipe plug
Three Way Connectors
Head Size Part # Price/E Pkg Qty
small
medium *
½" to 1"
1½" to 2"
SL09
SL10
$29.70
108.40
15
3
* medium three way connector comes with 1" NPT pipe plug
small three way connector medium three way connector *
Standard Natural Rubber Seals
Head Size Part # Price/E Pkg Qty
small
medium
½" to 1"
1½" to 2"
SLR1
SLR2
$1.50
1.80
1
1
Part # Price/E Pkg Qty
SLP1 $0.30 25
When inserting in quantity, seal insertion tools ensure correct alignment of standard Surelock seals.
Head Size Part # Price/E
small
medium
3/8" to 1-1/4"
1-1/2" to 2"
IT100SL
IT200SL
$171.70
171.70
small tool medium tool
In-line Strainer and Lubricator
To ensure proper operation the lubricator should be installed within 10 feet of the tool to be lubricated.
To adjust the lubricator oil flow:
• Remove the plug. Using a small screw driver turn the jet clockwise to decrease flow, or counter-clockwise to increase flow
• When adjusted correctly the spray of oil exhausting should cover an area of 10 - 12" in diameter when held 18" away from
the subject
lubricator
SLR1 SLR2
line strainer
Safety Locking Pin
Warning: The use of a safety locking pin is necessary to ensure that Surelock couplings will not become accidentally
disconnected. This guarantees that the fittings are properly connected as the pin will not go through the holes in both couplings
until the couplings are locked into place.
Seal Insertion Tools
• Note: econovalves are on page 523
Size Description Part # Price/E Pkg Qty
3/8" to 1-1/4"
1" FNPT
in-line strainer
FNPT x FNPT
in-line lubricator
SLS1
SLL1
$148.40
309.60
15
1