Page 124 - inside front cover

Miscellaneous
Dixon Powhatan 2007 10-12 1-800-355-1991
Backflow Preventer
Hydrant Meter with Backflow Preventer
Hand Hydrotest Pump
Reduced pressure principle backflow preventer is designed to give maximum protection
against backflow caused by either back-pressure or back-siphonage from a cross-connection
wherein a contaminant hazard exists (i.e. a health hazard), or a pollutant hazard exists (i.e. a
non-hazard). The assembly is composed of two spring-loaded poppet type check valves and a
mechanically independent, hydraulically dependent pressure differential relief valve. Three of
the testcocks are mounted at the top to assure easy access during repair and maintenance
when unit is installed in tight places.
You can create a Fire Hydrant Backflow Preventer by using a RSMSA25F20T and a DMH2025F.
• Suitable for supply pressure up to 175 psig and water temperatures from 33° F to 180° F.
• The backflow preventer meets the requirements of the following standards:
USC’s FCCC & HR Manual, Sec. 10, ASSE 1015, AWWA C-510 and CSA B64.4. .
• Working pressure: 175 PSI
Weight
Lbs.
41
Dixon
Part #
BFP200
NPT
Thread
2"
• The fire hydrant backflow meter consists of
2½" NST (NH) female swivel inlet, stainless steel internal strainer on inlet connection
3" size fire hydrant meter
2" size reduced pressure backflow preventer
2" resilient-seated full port shut-off valve with locking device
2½" NST (NH) male threaded outlet
Adjustable support rod assembly
• Suitable for supply pressure up to 150 psig
• Measurement of cold water up to 80°F with flow in one direction only
• The fire hydrant meter meets the requirements of: ANSI/AWWA C701-88
• The backflow preventer meets the requirements of AWWA C-511
• Working pressure: 150 PSI
Weight
Lbs.
70
Dixon
Part #
FHBFPWM250F
NH (NST)
Thread
2½"
Weight
Lbs.
7
Dixon
Part #
HHTP
Inlet
NPT
½"
Outlet
NPT
½"
• Stainless steel piston with aluminum body
• Designed for use in testing pipe lines, pressure tanks and pressure vessels
• Uses check valves which are more efficient and longer lasting than old poppet system
• Cylinder Displacement: 1.37 cu. in.
• 0 -1000 PSI pressure gauge, 10' high pressure hose and quick disconnect coupler included
• Piston: 7/8" w/ 2" stroke
• Working pressure: 1000 PSI