Page 31 - 4ConveyorBeltCatalog2010

SEO Version

33
Transmission Drive Belts
In all widths and lengths
Available in nylon core, plied fabric, and textile cord. Can
be supplied with leather or rubber covers in many
different compounds. Can be mechanically laced, skived,
or press and drum cured truly endless.
Pulleys, Idlers, and Accessories
Apache conveyor system accessories include a variety of pulleys, idlers and components. Whether it is a belt to convey or
elevate, Apache has the experience you can depend on to help keep your maintenance costs down by selecting the right
components and belting for your application.
Drum Pulley
High strength steel faced pulleys: available with rubber
lagging for improved traction.
Wing Pulley
Self cleaning angled gussets remove excessive build-up, improving
the effciency of your conveyor system. Wing pulleys increase traction
and reduce damage and abrasion on both the belt and the pulleys.
Not recommended for cleated belts.
Strip Lagging
Pulley lagging is installed using strips that are slid into tracks
which have been bolted or welded to the pulley face.
Custom Pulley Lagging
Sheet rubber is bonded to the pulley face with high-tech
adhesives. Ends of lagging material can be butted and flled
or lapped. Patterns such as herringbone can be cut into the
rubber surface.
drum Pulley
Wing Pulley
strip lagging
custom pulley lagging
ROUGH TOP PULLEY LAGGING
For this method of pulley lagging, a long strip of roughtop
is spiralled around the pulley from end to end and
centered for good adhesion. The ends may be notched
per sketch for neat application. Bolt or screw ends
intermittently throughout. Length of strip is calculated as
follows:
L = D x π x F
W
Idlers and Cleaners
Troughing and return idlers are available in a number of styles,
materials, and angles for any conveyor application. Several
styles of continuous belt cleaners are available to prevent
material build-up and reduce down time.
idler
cleaner
L = Length (in.)
D = Diameter (in.)
π = 3.1417
F = Face – width of pulley (in.)
W = Lagging width (in.)