D
Product Line Overview
What’s New?
Hot Oiler
The Prospector™ Hot Oiler hose was specifically designed
to initiate the flow of hot oil (275°F/135°C continuous;
300
°F/149°C intermittent) and bring it to the surface. The
hose is reinforced with dual-braided, high-tensile steel wire and
features an oil- and abrasion-resistant synthetic rubber cover to
help get the job done.
Prospector™ BOP 5000
This fire-tested, very high pressure BOP hose acts as a
hydraulic control connection that can be critically important
to the well control system. The hose is reinforced with up
to six layers of spiraled, high-tensile steel wire to handle
pressures that can reach 5,000 psi (34.5 MPa).
XCP3
With a special flame- and abrasion-resistant construction,
the XCP3 takes on high-pressure hydraulic applications,
and is designed to replace the SAE100R1 when a tougher,
more flexible hose is required. With 5X the abrasion
resistance over our standard cover, it’s easy to see why this
hose is the go-to choice.
Extended Life XR16SC
When the job requires tight bends, flexibility and abrasion
resistance, this high pressure service hose steps up to the
task. Using a nitrile inner tube and dual-braided, high-tensile
steel wire reinforcement, it can handle 4,500 psi (31 MPa)
flows of petroleum- and water-based hydraulic fluids.
DR2SN
The DR2SN high-pressure hose comes into play during
construction, machine, tool and agricultural applications
where high temperature petroleum- or water-based
hydraulic fluids are a factor. The hose features a blue CPE
cover, is flame resistant and meets higher EN/DIN pressures.