58
Standard Compounds
6740
A:
Compounded for excellent heat and abrasion
resistance in temperature ranges of 350˚F (177°C) for lumpy
material and up to 250˚F (121°C) for hot baking loads.
Alumina – HOT:
Specifically designed compound intended for
usage at alumina facilities where the alumina product is at or
above 160°F (71°C).
Defender® Plus:
An ARPM Grade I rubber compound designed
to provide excellent abrasion resistance, very good gouge
resistance and excellent flexing life.
Easyrider®:
A low rolling resistance family of compounds for the
pulley cover side only which is designed to reduce the energy cost
by minimizing indention energy loss to idlers. Proven with almost
400
miles of belt in operation, the LRR Easyrider™ compound can
provide up to 20% reduction in energy consumption compared
to standard compounds and the SLRR Easyrider™ compound
can provide up to 32% reduction in energy consumption.
FR-2G:
Designed especially for above-ground prep plants/power
plant applications mining underground and meets ASTM
D378-13.2 (old MSHA CFR 30 part 18) flame test standard.
FRAR-2G:
Designed for non-coal underground mining and
surface applications that meet ASTM D378-13.2 (old MSHA CFR
30
part 18) flame test standard and offers 70% more abrasion
resistance than FR-2G.
FRORS-2G:
Moderate resistance to oil and static conductive, this
compound is designed for oily coal or coke material. OMEGA®
meets ASTM D378-13.2 (old MSHA CFR 30 part 18) flame test
standard.
FRAS-SA & FRAS-C:
Fire retardant antistatic belting is certified
by the Canadian Department of Energy, Mines and Resources,
Ottawa to CAN/CSA M422M87, Type C, for below surface use
as well as other mining operations. FRAS-SA offers minimum of
40%
better abrasion resistance than FRAS-C compound.
GRADE II:
An ARPM Grade II rubber compound designed to
provide good abrasion and gouge resistance and very good
flex life.
GLOBAL X®:
Meets ARPM Grade I and DIN X standards.
Offers superior cut and gouge resistance and very good
abrasion resistance.
HT Nitrile:
An oil resistant compound formulated for applications
demanding higher resistance to heat, oil and abrasion. It is
resistant to temperatures up to 300°F (149°C), abrasion flexing,
oxidation and the effect of corrosive atmospheres.
MonsterHide:
MonsterHide is an ARPM Grade II compound
providing the ultimate in cut and gouge protection. The
compound is designed to absorb impacts from large sharp
rock.
MORS:
Compounded to resist the terpene content of wood
chips and moderately oily grains. It has fair abrasion resistance
and is a good value for handling moderately oily material where
fire resistance is not required.
Pathfinder® Arctic:
Designed especially for the grain industry
where oily grains and controlled mineral or vegetable oil dust
suppressive sprays come in contact with the belt. Suitable to
-40
˚F (-40°C).
Pathfinder® Supreme:
Designed especially for the grain
industry where oily grains and controlled mineral or vegetable
oil dust suppressive sprays come in contact with the belt.
Protector:
A Grade II compound for applications requiring
good abrasion and gouge resistance and very good flex life.
Solar-Shield® XL 750:
An exceptional hot material
compound with superior heat resistance against hardening
and cracking. It is designed to carry hot loads at intermittent
temperatures up to 750˚F (399°C) and retain its superior heat
resistant qualities.
Stacker®:
Premium ARPM Grade I Rubber Compound, designed
for excellent resistance to cutting, gouging and abrasion.
Survivor®:
Superior abrasion resistance. Ideal for high speed,
small diameter crushed stone, trap rock, ore, copper, taconite
and other abrasive applications.
Survivor® Plus:
The ultimate in abrasion resistance, offering up
to 40% more abrasion resistance than Survivor.® Ideal for high
speed, abrasive material applications.
2015
Heavyweight Conveyor Belts
Cover Compounds