Page 156 - DixonCatalog20092010

154

DPL410

877.963.4966 • www.dixonvalve.com

E

Air

Advantages:

•

economical fitting resists mechanical pullout

•

easy to disassemble and may be reassembled repeatedly, for a leak-proof connection

•

manufactured from CA 360, CA 345, or CA377 brass

•

manufactured especially for hard-to-hold liquids and gases

Specifications:

•

Listed with Underwriter's Laboratories for flammable liquid, marine, refrigeration and gas applications. Meets functional

requirements of SAE J512 and J513, ASA and MS (Military Standards).

•

temperature range:

-65°F

to

250°F

Applications:

•

use with copper, brass, aluminum and welded steel hydraulic tubing that can be flared

Working Pressure Ranges:

Temperature and type of tubing used are important factors, the following table is a good guide for proper selection.

The PSI rating given is based on a temperature of

73°F

using copper tubing.

Assembly Instructions:

1. Cut tubing squarely and clean tube end thoroughly to remove burrs.

2. Place nut onto tube. Place threaded end of nut toward end of tube.

3. Flare tube end with flaring tool to provide 45° flare. (flare tools are available, please contact the factory for pricing and

availability)

4. Clamp tube flare between nut and nose of fitting body by screwing nut on finger-tight. Tighten with a wrench an additional

¼ turn for a metal-to-metal seal.

PSI

Tube OD

Tube Wall

1400

1000

750

650

550

1/4"

3/8"

1/2"

5/8"

3/4"

.030

.032

.035

Long Nuts

Tube Size Straight

Thread

Hex

Brass

Part #

Price/E

1/4"

3/8"

1/2"

7/16-20

5/8-18

3/4-16

9/16"

3/4"

7/8"

41FL-4

41FL-6

41FL-8

$1.90

5.40

6.65

•

long nut offers additional vibration capacity

•

reference SAE 010111

Short Nuts

Tube Size Straight

Thread

Hex

Brass

Part #

Price/E

1/4"

3/8"

1/2"

7/16-20

5/8-18

3/4-16

9/16"

3/4"

7/8"

41FS-4

41FS-6

41FS-8

$1.55

2.65

3.70

•

short nut may be used when vibration is minimal

•

reference SAE 010110